IN THE WORKSHOPSemiconductor D622726
Complex pockets and dense hole patterns demand careful control of fixturing and distortion. Low-stress clamping, cryogenic treatment after roughing and staged inspection shape the process around the drawing.
Explore the project IN THE WORKSHOPMedical C50746F1
From the turned datum to gear shaping and surface finishing, setup alignment and thin-wall distortion are managed around the specified coaxiality requirement.
Explore the project
PROJECT SPOTLIGHTOptics 19002673
Blasting can deform the thin-wall cylinder, while its surface texture must match the customer sample. Dimensions are accepted in the finished surface-treatment condition, and the U-shaped slots must be burr-free.
Explore the project
PROJECT SPOTLIGHTMedical MC0885
Subsurface porosity and casting marks on the four-arm casting can become visible after powder coating. Machining marks also affect appearance, while hole positions and stainless-steel insert installation require control.
Explore the project IN THE WORKSHOPSemiconductor D622726
Complex pockets and dense hole patterns demand careful control of fixturing and distortion. Low-stress clamping, cryogenic treatment after roughing and staged inspection shape the process around the drawing.
Explore the project IN THE WORKSHOPMedical C50746F1
From the turned datum to gear shaping and surface finishing, setup alignment and thin-wall distortion are managed around the specified coaxiality requirement.
Explore the project
PROJECT SPOTLIGHTOptics 19002673
Blasting can deform the thin-wall cylinder, while its surface texture must match the customer sample. Dimensions are accepted in the finished surface-treatment condition, and the U-shaped slots must be burr-free.
Explore the project
PROJECT SPOTLIGHTMedical MC0885
Subsurface porosity and casting marks on the four-arm casting can become visible after powder coating. Machining marks also affect appearance, while hole positions and stainless-steel insert installation require control.
Explore the project IN THE WORKSHOPSemiconductor D622726
Complex pockets and dense hole patterns demand careful control of fixturing and distortion. Low-stress clamping, cryogenic treatment after roughing and staged inspection shape the process around the drawing.
Explore the project IN THE WORKSHOPMedical C50746F1
From the turned datum to gear shaping and surface finishing, setup alignment and thin-wall distortion are managed around the specified coaxiality requirement.
Explore the project
PROJECT SPOTLIGHTOptics 19002673
Blasting can deform the thin-wall cylinder, while its surface texture must match the customer sample. Dimensions are accepted in the finished surface-treatment condition, and the U-shaped slots must be burr-free.
Explore the project
PROJECT SPOTLIGHTMedical MC0885
Subsurface porosity and casting marks on the four-arm casting can become visible after powder coating. Machining marks also affect appearance, while hole positions and stainless-steel insert installation require control.
Explore the project 02 / 04